Find/Replace Operation; Device/Contact/Coil Search - Mitsubishi Electric GOT2000 Series User Manual

(4) Copy program memory data into ROM window
Writing data in the program memory into a ROM is available.
(a) Displayed screen
The following table shows the displayed contents.
No.
1)
2)
4.8

Find/Replace Operation

4.8.1

Device/Contact/Coil search

Ladder blocks including the set devices are searched.
They can be searched continuously in multiple sequence program files.
Step 1.
Execute any of the following operations to display the device search window.
• Touch the [Find] → [Find device]/[Find contact]/[Find coil] menu on the Ladder monitor screen.
• Touch the [Find/Replace] → [Find device]/[Find contact]/[Find coil] menu on the Ladder editor screen.
Step 2.
Set a device to be searched and touch the
• Displayed screen
(For alphabet input)
No. Item
1) Device input area
2) Keys
4 - 48
4.8 Find/Replace Operation
1)
Item
Touch the target ROM.
• Standard ROM: Set the standard ROM in the PLC CPU as the target.
Target
• IC card (ROM): Set the IC memory card (Flash card) inserted in the PLC CPU
as the target.
[Execute] Touching the key writes data in the program memory into the target ROM.
Set a device to be searched.
Bit device words cannot be specified.
The device can be input also by selecting a device on the ladder monitor screen, ladder editor
screen, Ladder registration monitor window.
Keys for operations in the device search window shown in (b).
Description
/ /[Enter] key
1)
2)
(For numerical input)
Description
2)
1)
2)