Operation Procedures - Mitsubishi Electric GOT2000 Series User Manual

18.4 Operation Procedures

■1. Displayed contents
This section describes the display data of the CNC data I/O list screen and the key functions displayed on the screen.
1) Channel key
Displays the communication setting window.
2) [CNC Chg] key
This key switches CNCs for monitoring when multiple CNCs are connected.
The switching order differs depending on the connection type used.
• For bus connection
The monitoring target is switched in order of the module number.
• For Ethernet connection
The monitoring target is switched in the order set in the Ethernet setting of GT Designer3.
3) [Rtn] key
Exits the CNC data I/O and returns to the monitor screen or the utility of the GOT.
4) CNC device name
Each connection type displays different contents.
• For bus connection
Displays the CPU number and module name.
• For Ethernet connection
Displays the station number and module name.
5) [Function] key
Displays the function selection window. Select a function to be executed.
The following shows the items to be selected.
• [Copy]
Copies a file between the CNC and data storage.
➠
• [Compare]
Compares files between the CNC and data storage.
➠
• [Delete]
Deletes a file in the CNC or data storage.
➠
• [Create a directory]
Creates a directory in the data storage.
➠
• [USB Driver Stop]
Stops the USB drive selected in the [Device] key.
18 - 6
18.4 Operation Procedures
5)
6)
7)
8)
6)
7)
■2. Copy
■3. Compare
■4. Delete
■5. Creating a directory
1) 2) 3)
12) 13)
4)
9)
10)
11)
14)
15)