Mitsubishi Electric GOT2000 Series User Manual page 384

■3. Operation after executing the network batch backup or restoration
When the network batch backup/restoration is executed, the following operations are performed.
Start backing up or restoring after preparing a
controller list file
The controller list file of the channel selected
from the Main Menu is read.
Start backing up or restoring to the controller
set in the controller list file.
Execute the backup or restoration to each
controller.
Yes
Backup/restoration completed
*1
(1) Operations if an error occurs during backup
If an error occurs, the backup being executed is canceled and the error dialog box is displayed. (The error is
displayed by the controller set in the controller list file.)
After the error dialog box is closed, the backup to the next controller set in the controller list file is continued.
However, the backup data cannot be written because a SD card is not installed or does not have sufficient capacity,
the backup to all controllers is canceled.
(2) Handling of the backup data when the backup is canceled
Backup data of controllers canceled for an error occurrence or a cancellation of password input on the controller is
deleted by the controller set in the controller list file.
Backup data backed up normally remains by the controller set in the controller list file.
(3) Operations if a password on the controller is set to the backup target
If the password input on the controller is canceled, the backup being executed is canceled and the backup to the next
controller set in the controller list file is continued.
If a password for backup or restoration is set on the GOT, a password on the controller can be input to the controller,
for which the password input was canceled, at the next time.
By inputting the correct password, password input is not required at the next execution.
For the password for backup or restoration, refer to the following.
➠
(4) Operation for trigger backup
• The backup does not executed if the GOT cannot communicate with controllers because of a communication error
or others.
• If no previous backup data to be compared exists, the backup is executed.
• Even if the backup being executed is canceled for an error occurrence, the backup to the next controller set in the
controller list file is continued.
10 - 42
10.3 Operations for Display
*1
Can the GOT communicate
with controllers?
Yes
Is the controller list file
setting normal?
Yes
Is there any controller not
backed up or not restored in the
controller list file?
No
For the details, refer to the following.
➠
10.3 Operations for Display
10.3.2 Security and password
No
No
Notify errors and skip the backup or restoration
of the target controller.