Mitsubishi Electric GOT2000 Series User Manual page 340

■7. DO forced output screen
The following describes the display data of the DO forced output screen and the key functions displayed on the screen.
(1) Displayed contents
1) ON/OFF status of output signals
Displays the ON/OFF status of the servo amplifier output signals.
After this screen has been switched to another screen, all external I/O signals are turned off.
(2) Key functions
The table below shows the functions of the keys used for the operations of the DO forced output screen.
1) [Menu] key
Returns to the function selection menu screen.
2) [End] key
Exits the servo amplifier monitor.
3) Output signal key
Output signal name key
[DO1]
4) [JOG] key
Changes to the JOG operation screen.
➠
9 - 40
9.4 Operations of Servo Amplifier Monitor Screens
1)
3)
4)
5)
6)
7) 8)
Item
Touching the signal name of an output signal sets or resets the status for that signal.
• If the present output signal is ON, then the signal is turned off (RESET).
• If the present output signal is OFF, the signal is turned on (SET).
Displays the external output signals of the extension I/O unit.
This is displayed only when the MR-J2M-P8A is connected.
■4. JOG operation screen
1) 2)
Description