(2) Key functions
The table below shows the functions of the keys that are used for the operations of the motor-less operation screen.
4)
5)
6)
1) [Menu] key
Returns to the function selection menu screen.
2) [End] key
Exits the servo amplifier monitor.
3) [Start] key
Starts motor-less operation.
4) [JOG] key
Changes to the JOG operation screen.
➠
■4. JOG operation screen
5) [Positioning] key
Changes to the positioning operation screen.
➠
■5. Positioning operation screen
6) [DO ForcedOutput] key
Changes to the DO forced output screen.
➠
■7. DO forced output screen
7) [Print Screen] key
Stores the displayed screen to the SD card in the BMP or JPEG format.
For further information about hard copies, refer to the following:
➠
9.4.8 Hard copy output
8) [Cancel Print] key
The touch operation of this key is invalid.
7)
8)
9.4 Operations of Servo Amplifier Monitor Screens
1)
2)
3)
9
9 - 39