Mitsubishi Electric GOT2000 Series User Manual page 369

■1. Setting password for backup/restoration
The password for the backup/restoration can be set only when the following condition is satisfied at the first backup.
• When passwords are set for the files for the backup target controller
At the first backup, the password authentication for the controller is required.
The following shows the operating procedure at the first backup.
Touch [Backup function] in the main menu on
the GOT. (The first backup)
Other than the FXCPU
Input the password for the controller.
(When the password for the first file is verified,
the other files are automatically verified using
the password for the first file. When the
automatic verification fails, input the
corresponding password.)
No
Yes
Yes
Yes
Set the password for the backup/restore.
(Set 32 or less alphanumeric characters
for the password.)
*1 For the details, refer to the following.
➠
Start
*1
Is a password set for the
file to be backed up?
Yes
Is the password correct?
Yes
The file is backed up.
Is there another file?
No
Is there another unit?
(In the multiple CPU system)
No
Is there another controller to
be backed up?
(when with controller list file)
No
Backup completed
10.4 Operation Procedures
FXCPU
No
When a keyword is set,
disable the keyword.
10.3 Operations for Display
10
10 - 27