Other Station Monitor - Mitsubishi Electric GOT2000 Series User Manual

(a) When the GOT target is AnACPU or AnNCPU
"MELSECNET(II)" is displayed even if a MELSECNET/10 network module is installed.
In addition, if there is a master station and local station, module 1 of the line monitor is displayed as "Master
station"
1st module
Local station
(2) Key functions
1) [Ch: 1] key
Displays the communication setting window.
2) Monitoring target CPU
The monitoring target CPU is changeable by switching the CPU number only when the CPU is in the multiple
CPU system.
The CPU number is displayed according to the number of mounted CPU modules.
3) [END] key
Exits the line monitor and returns to the screen where the network monitor function was started.
4) Detailed monitor
Switches to the detailed monitor screen that corresponds to the module displayed on the current monitor
screen.
This key is effective for each screen.

5) Other station monitor

Switches to the other station monitor menu that corresponds to the network displayed on the current monitor
screen.
This key is effective for each screen.
6) Module display switching key
Switches the module display.
6 - 16
6.4 Operation Procedures
Network module
2nd module
Master station
2)
1)
4)
5)
Display on the GOT
Module 1
Master station
3)
Module 2
Local station
6)