Mitsubishi Electric GOT2000 Series User Manual page 572

[MDI Register] key
[INSERT] key
[To Lists] key
■3. Software key board
1)
4)
3)
2)
1) Alphanumeric and symbol keys
Used to input alphabets, numbers, spaces, and symbols.
Symbols shown in gray can be input when the [SHIFT] key is turned on.
[EOB] key
2) Cursor movement keys
Moves the cursor.
3) Left tab key
The key operation differs according to the cursor position.
• When the cursor is displayed in the editing area
The cursor moves to the beginning of a word.
When the cursor is placed at the beginning of a word, the cursor moves to the beginning of the previous
word.
• When the cursor is displayed in the input area
The cursor moves to the first character.
4) Right tab key
The key operation differs according to the cursor position.
• When the cursor is displayed in the editing area
The cursor moves to the beginning of the next word.
• When the cursor is displayed in the input area
The cursor moves to the last character.
5) [C.B] key, [CAN] key
The [CAN] key is enabled when the [SHIFT] key is turned on.
The key operation differs according to the cursor position.
[C.B] key
19 - 8
19.4 Operation Procedures
Item
Registers the MDI program as the CNC machining program.
To perform the MDI registration, enter a machining program number in the input area, and then
touch the [INPUT] key.
An MDI program can be registered only when the program is opened.
Switches between the insert mode (ON) and the overwrite mode (OFF).
• ON: Insert mode
• OFF: Overwrite mode
Switches the screen to the list screen.
8) 9)
[SHIFT] OFF
Item
Inputs EOB (;).
Item
• When the cursor is displayed in the editing area
Deletes all characters of the block at the cursor position.
• When the cursor is displayed in the input area
Deletes all characters in the input area.
1)
4)
5)
6)
3)
7)
2)
Description
8) 9)
[SHIFT] ON
Description
Description
5)
6)
7)