Mitsubishi Electric GOT2000 Series User Manual page 492

■2. Key functions
The table below shows the functions of the keys that are used for the operation on the MELSEC-FX list editor screen.
Key
[ChNo.[1]]
[MODE]
[OP]
[MORE]
[CLR]
[SP]
[STEP]
[ ] [ ] ，
[GO]
[LD] to [INV], [0] to [9], etc.
[×]
■3. Keyboard switching
Touching the [MORE] button switches the command keyboard 1 and command keyboard 2.
When you touch the button for a keyboard function, the optimum keyboard for input for that function is displayed
automatically.
15 - 10
15.4 Operation Procedures
Displays the communication setting window.
The communication setting window is not displayed if the MELSEC-FX list editor is started
from the FX ladder monitor.
Selects a mode for MELSEC-FX list editor.
➠
15.4.2 Selection and operation of modes
Displays the PLC diagnostics, parameter setting, and keyword selection menu.
Switches between command keyboard 1 and command keyboard 2.
➠
■3. Keyboard switching
When inputting commands: Cancels the key input when only part of the command has been
input.
➠
15.4.14 Action for an incorrect key input
When option menu is displayed: Closes the option menu.
Commands cannot be deleted with this key.
➠
15.4.7 Deleting commands
Space key.
This key is used when setting timers and counters, writing applied commands, etc.
Displays the list from a specified step No. when the step No. is input.
Moves the list display area bar up and down and switches the line being edited.
Determines the key operation.
Inputs commands, device names, etc.
The key contents depend on the input contents.
The commands that can be used differ depending on the target FX PLC.
Refer to the manual for the FX PLC to be used.
Exits the MELSEC-FX list editor.
Command keyboard 1
Function
Command keyboard 2
Touch [MORE]
Touch [MORE]