Mitsubishi Electric GOT2000 Series User Manual page 120

4.7 How to Operate Ladder Editor Screen
On the Ladder editor screen, editing sequence programs, finding devices, and displaying comments are available.
The ladder editor is supported only by the sequence program monitor (Ladder).
The following describes how to operate the Ladder editor screen.
4.7.1 Displayed contents
■1. Ladder editor screen
The following describes the configuration of the Ladder editor screen, menus and key functions on the screen.
No. Item
1) PLC name
2) Target controller
3) Drive name
4) Program name
5) Number of steps
6) Keys
7) Ladder display area
8) Message display area
4 - 32
4.7 How to Operate Ladder Editor Screen
1)
6)
7)
8)
Displays the label set in the PLC name setting for the target PLC CPU.
Displays the CH No., network No., station No., and CPU No. of the target PLC CPU as shown
below.
• CH No. network No.-station No./CPU No.
Displays the drive of the controller for the displayed sequence program.
Displays the file name of the displayed program.
Displays the number of steps for the displayed sequence program.
Keys for operations for the Ladder editor screen shown in 4.7.2. (Touch input)
Displays the read sequence program.
By touching a contact, coil, statement, or note, the item is highlighted and the Ladder input
window is displayed.
➠
(1) Enter ladder program window
Touch [Show comments] from the [Display] menu to display the comments, statements or
notes.
Touch [Hide comments] from the [Display] menu to hide the comments, statements or notes.
Displays the first step number of ladder blocks.
Touching the first step number of ladder blocks highlights the touched position, and displays
the Enter ladder program window.
➠
(1) Enter ladder program window
Displays error messages and others.
2) 3) 4) 5)
Description
6)