Specifications; System Configuration; Access Range - Mitsubishi Electric GOT2000 Series User Manual

11.2 Specifications

11.2.1

System configuration

This section describes the system configuration of the MELSEC-L troubleshooting.
For connection type settings and precautions regarding the communication unit/cable and connection type, refer to the
following.
➠
■1. Target controller
LCPU
■2. Connection type
This function can be used in the following connection types.
(○: Available, ×: Unavailable)
Name
MELSEC-L Displays the status and errors of the LCPU
troubleshooting and starts various monitor functions.
*1
*2
*3
*4
■3. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the MELSEC-L troubleshooting
to the GOT.
For the communication method with the GOT, refer to the following.
➠
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
11.2.2

Access range

■1. When using the direct CPU connection or serial communication connection
The LCPU of the host station can be monitored.
■2. When using Ethernet connection
The LCPU of the host and other stations can be monitored.
■3. When using CC-Link connection (Intelligent device station/via G4)
The LCPU of the master and local stations can be monitored.
11 - 2
11.2 Specifications
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
Controller
Function
Description
Indicates CC-Link connection (Intelligent device station).
Indicates CC-Link connection (via G4).
When the GOT is connected to LCPU, use L6ADP-R2.
MELSEC-L troubleshooting cannot be used when using CC-Link IE field network Ethernet adapter.
1.2 System Applications (Extended Functions) Required for Each Function
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
Connection type between GOT and LCPU
Serial
Direct CPU
communication
connection
connection
*3
○
○
CC-Link connection
Ethernet
*4
connection
*1
ID
○ ○
*2
G4
○