Mitsubishi Electric GOT2000 Series User Manual page 309

■1. Changing screens
The following describes how to change the screen.
For the details of each function, refer to the following.
➠
9.4.2 Setup
9.4.3 Monitor functions
9.4.4 Alarm function
9.4.5 Diagnostics function
9.4.6 Parameter setting
9.4.7 Test operations
Start
At the second
or later startup
Utility
or
usear-created
monitor screen
[ ]
End
key
Communication setting window
Setup
[ ]
Setup
key
MENU
[ ]
End
key
POINT POINT POINT
To exit by touching the [End] key
At next startup of the servo amplifier monitor, the last exited screen is displayed.
If using the same screen frequently, exiting with the [End] key is convenient.
However, the last exited screen is not displayed if the servo amplifier monitor screen data was
deleted due to an installation of package data, turning the GOT power from off to on, or a reset.
At the first startup
[Ch: ] key
[ ]
Fix
key
Touch any
[ Setup ]
of the
[ ]
Monitor
functions.
[ ]
Alarm
[ Diagnostics ]
[ ]
Menu
[ ]
Parameters
key
[ ]
Test
9.3 Operations of Display
9
9 - 9