Displayed Contents - Mitsubishi Electric GOT2000 Series User Manual

5.5 How to Operate Block List Screen
On the block list screen, the GOT displays blocks within the read SFC program in a list.
The following describes how to operate the block list screen.
5.5.1

Displayed contents

The following describes the configuration of the block list screen, menus and key functions on the screen.
1) PLC name
Displays the label set in the PLC name setting for the target PLC CPU.
2) Target controller
Displays the CH No., network No., station No., and CPU No of the target PLC CPU as shown below.
CH No. network No.-station No./CPU No.
3) Program name
Displays the file name (without the extension) of the displayed program.
4) Keys
The keys used for the operations on the block list screen.
5) Block list
Displays the block numbers and block titles in the displayed program.
The block numbers are not displayed with no block.
Active blocks are highlighted.
Selecting a block title displays the block data on the SFC diagram monitor screen.
➠
5.6 How to Operate SFC Diagram Monitor Screen
6) Block information list
Displays block information for each block.
When devices are set for the block information, the set devices are displayed in the corresponding cells.
7) Message display area
Displays error messages and others.
1)
4)
5)
7)
2) 3)
5.5 How to Operate Block List Screen
4)
6)
4)
5 - 19
5