Mitsubishi GOT1000 Series Connection Manual page 1188

2 Using the FA transparent function
When multiple GOTs are connected, using the FA transparent function through connection via the RS-
232 interface or USB interface of the GOT is not allowed.
3 Monitoring stop condition for the GOT in the multiple-GT11 connection
In the system where multiple GOTs are connected, performing either of the following monitoring stop
operations on the preceding stage (the first GOT) also stops monitoring of the GOT on the next stage
(the second GOT).
When the GOT on the preceding stage resumes monitoring, the GOT on the next stage also resumes it.
(1) When project data is downloaded/uploaded by GT Designer2, or when the OS is installed
(2) When the GOT is set up
*1 A timeout error occurs in GX Developer.
30 - 18
30.4 Precautions
1st GOT 2nd GOT
USB
PC
1st GOT
*1
1st GOT
Downloading
USB
The project data is being download.
PC
RS-232
PC
GT Designer2
2nd GOT
Monitoring
stopped
*1