Mitsubishi GOT1000 Series Connection Manual page 1208

(2) When using the "PING Test" of GT Designer2
Select [Communication]
"PING Test".
(3) When abnormal communication
At abnormal communication, check the followings and execute the Ping command again.
• Mounting condition of Ethernet communication unit
• Cable connecting condition
• Confirmation of "Communication settings"
• IP address of GOT svpecified by Ping command
All settings related to communications are complete now.
Create screens on GT Designer2 and download the project data again.
31 - 18
31.2 Preparatory Procedures for Monitoring
31.2.7 Checking for normal monitoring
[Communication configuration]
Ethernet diagnostics of GX Developer
Ethernet diagnostics of GX Developer is available to a Ping test from the PLC.
For details of Ethernet diagnostics of GX Developer, refer to the following manual.
User's Manual of the Ethernet module
If all the communication settings are completed
Set up the gateway function to be used.
GOT1000 Series Gateway Functions Manual
"Ethernet" and
1 Specify the "GOT IP address" of the
"PING Test" and click on the
button.
2 The "Test Result" is displayed after the
"PING Test" is finished.
to display
Test
PING Test