Ip Ssh Server; Ip Ssh Pubkey-Auth - Dell Networking 2024 Reference Manual

Example
The following example specifies the port to be used by the SSH server as
8080.
console(config)#ip ssh port 8080

ip ssh pubkey-auth

Use the ip ssh pubkey-auth command in Global Configuration mode to
enable public key authentication for incoming SSH sessions. To disable this
function, use the no form of this command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Default Configuration
The function is disabled.
Command Mode
Global Configuration mode
User Guidelines
AAA authentication is independent from this configuration.
Example
The following example enables public key authentication for incoming SSH
sessions.
console(config)#ip ssh pubkey-auth

ip ssh server

Use the ip ssh server command in Global Configuration mode to enable the
switch to be configured from SSH. To disable this function, use the no form
of this command.
1640
SSH Commands