CIM – Central Interrupt Module Registers Reference
CIM Registers have the following attributes:
•
32-bit width
•
Addresses placed on word boundaries
•
Byte, half-word and word writes permitted
•
All Registers have read/write access in any mode
•
Interrupt Mask and FIQ/IRQ Program Control Registers are writeable in privilege mode only. A write in
user mode to these Registers causes a peripheral illegal access exception.
...........................................................................................................................
Topic
18.1
IRQ Index Offset Vector Register (IRQIVEC)
18.2
FIQ Index Offset Vector Register (FIQIVEC)
18.3
FIQ/IRQ Program Control Register (FIRQPR)
18.4
Pending Interrupt Read Location Register (INTREQ)
18.5
Interrupt Mask Register (REQMASK)
SNIU028A – February 2016 – Revised April 2016
Submit Documentation Feedback
.........................................................
.........................................................
........................................................
...................................................................
Copyright © 2016, Texas Instruments Incorporated
SNIU028A – February 2016 – Revised April 2016
.............................................
CIM – Central Interrupt Module Registers Reference
Chapter 18
Page
526
527
528
529
530
525