Texas Instruments UCD3138 Technical Reference Manual page 206

Loop Mux Registers Reference
Table 5-11. Constant Power Control Register (CPCTRL) Register Field Descriptions (continued)
Bit Field
2 CCPC_INT_EN
1 CPCC_CONFIG
0 CPCC_EN
206
Loop Mux
Type Reset
R/W 0
Constant Power/Constant Current Interrupt Enable
0 = Interrupt disabled on mode switches (Default)
1 = Interrupt enabled on mode switches
R/W 0
Controls Constant Power/Constant Current module configuration
0 = Average Current Mode (Default)
1 = Constant Power Module controls selection of voltage/current loop
R/W 0
Constant Power Constant/Current Module Enable
0 = Constant Power/Constant Current Module disabled (Default)
1 = Constant Power/Constant Current Module enabled
Copyright © 2016, Texas Instruments Incorporated
Description
SNIU028A – February 2016 – Revised April 2016
Submit Documentation Feedback
www.ti.com