The System Module:
•
Enables and sets memory addresses for all memory mapped items
•
Controls write and erase of flash memory
•
Provides control and monitoring of the interrupt signals from the peripherals
•
Controls clocks, software interrupts, system exceptions
The blocks inside the system module are the address decoder (DecRegs), memory control (MMCRegs),
system management (SysRegs), and central interrupt (CimRegs).
...........................................................................................................................
Topic
16.1
Address Decoder (DEC)
16.2
Memory Management Controller (MMC)
16.3
System Management (SYS)
16.4
Central Interrupt Module (CIM)
16.5
SYS – System Module Registers Reference
496
Control System Module
....................................................................................
...............................................................
................................................................................
...........................................................................
.........................................................
Copyright © 2016, Texas Instruments Incorporated
SNIU028A – February 2016 – Revised April 2016
Control System Module
SNIU028A – February 2016 – Revised April 2016
Submit Documentation Feedback
Chapter 16
Page
497
502
502
502
508