Temp Sensor Control Register (Tempsenctrl); Temp Sensor Control Register (Tempsenctrl) Register Field Descriptions - Texas Instruments UCD3138 Technical Reference Manual

Temp Sensor Control Register (TEMPSENCTRL)

8.12 Temp Sensor Control Register (TEMPSENCTRL)

Address FFF7F02C
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 8-1. Temp Sensor Control Register (TEMPSENCTRL) Register Field Descriptions
Bit Field
31-1 Reserved
0 TEMP_SENSE_
DIS
Writing into the reserved bits is NOT RECOMMENDED since it is likely to have
an adverse effect on the normal operation of Temperature Sensor. In the
process of Clearing (or setting) the TEMP_SENSE_DIS bit, the other bits in the
register need to remain intact. Therefore it is recommended to use a read-
modify-write technique to clear or set this bit.
306
ADC12 Overview
Figure 8-11. Temp Sensor Control Register (TEMPSENCTRL)
Reserved
R/W-00 0000
Type Reset
R/W 00 0000
R/W 1
Temperature Sensor Disable
0 = Enables Temperature Sensor
1 = Disables Temperature Sensor (Default)
Copyright © 2016, Texas Instruments Incorporated
Description
CAUTION
SNIU028A – February 2016 – Revised April 2016
www.ti.com
1 0
TEMP_SENSE_
DIS
R/W-1
Submit Documentation Feedback