Brownout Register (Brownout); Brownout Register (Brownout) Register Field Descriptions - Texas Instruments UCD3138 Technical Reference Manual

www.ti.com

9.8.2 Brownout Register (BROWNOUT)

Address FFF7F014
2
INT
R-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 9-4. Brownout Register (BROWNOUT) Register Field Descriptions
Bit Field
2 INT
1 INT_EN
0 COMP_EN
SNIU028A – February 2016 – Revised April 2016
Submit Documentation Feedback
Figure 9-5. Brownout Register (BROWNOUT)
Type Reset
R 0
Brownout Interrupt Status
0 = No Brownout Condition observed
1 = Brownout Condition observed
R/W 0
Brownout Interrupt Enable
0 = Brownout Interrupt disabled (Default)
1 = Brownout Interrupt enabled
R/W 0
Brownout Comparator Enable
0 = Brownout comparator logic disabled (Default)
1 = Brownout comparator logic enabled
Copyright © 2016, Texas Instruments Incorporated
Miscellaneous Analog Control Registers
1
INT_EN
R/W-0
Description
Advanced Power Management Control Functions
0
COMP_EN
R/W-0
337