Chapter 1 Arp Configuration Commands; Arp Static - Huawei Quidway S2000 Series Command Manual

Command Manual - Network Protocol
Quidway S2000 Series Ethernet Switches

Chapter 1 ARP Configuration Commands

1.1 ARP Configuration Commands

1.1.1 arp static

Syntax
arp static ip-address mac-address [ vlan-id { interface_type interface_num |
interface_name } ]
undo arp ip-address
View
System view
Parameter
ip-address: IP address of the ARP mapping entry.
mac-address: MAC address of ARP mapping entry, whose format is H-H-H ( H
indicates a hexadecimal number).
vlan-id: VLAN to which the static ARP entry belongs, which is in the range of 1 to 4094.
interface_name: Port to which the static ARP entry belong, represented with
interface_name= interface_type interface_num. interface_type is port type and
interface_num is port number. For details about interface_type, interface_num and
interface_name, refer to the Port Command Manual.
Description
Using arp static command, you can configure the static ARP mapping entries in an
ARP mapping table. Using undo arp static command, you can cancel a static ARP
mapping entry from the ARP table
By default, the mapping table of the system ARP is empty and the switch can maintain
its address mapping by means of dynamic ARP.
Note that:
Chapter 1 ARP Configuration Commands
1-1