Route Ethernet Cables For The Lower Subrack - Huawei OptiX OSN 3500 Quick Installation Manual

• Route Ethernet cables for the lower subrack

1
Route the Ethernet cables into
the cabinet through the cable
holes on the top of the cabinet.
b
Underfloor Cabling
1
1 Route the Ethernet cables into the cabinet through
the cable holes at the bottom of the cabinet.
Guide rail
2
Route the cables for the lower
subrack downwards along the side
panel of the cabinet to the cable
distribution plate above the lower
subrack.
2
2
Route the cables for the upper subrack upwards along
the side panel of the cabinet to the cable distribution
plate above the upper subrack.
53
3
Route the cables through the cable
distribution plate, and then connect
them to the RJ45 ports on the
Ethernet board from the upper part
to the lower part.