Display Qos-Interface Traffic-Redirect - H3C s3100 series Command Manual

unit-id: Unit ID, which is fixed to 1. With this argument specified, the priority marking configuration of all
the ports on the device is displayed.
Description
Use the display qos-interface traffic-priority command to display the priority marking configuration of
a port or all the ports on the device.
Related command: traffic-priority.
Only H3C S3100-EI series switches support this command.
Example
# Display the priority marking configuration of Ethernet 1/0/1 (assuming that the current device is an
S3100-EI series switch).
<Sysname> display qos-interface Ethernet 1/0/1 traffic-priority
Ethernet1/0/1: traffic-priority
Inbound:
Matches: Acl 2000 rule 0
Priority action: cos controlled-load
Table 1-4 Description on the fields of the display qos-interface traffic-priority command
Field
Ethernet1/0/1
Inbound
Matches
Priority action

display qos-interface traffic-redirect

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-redirect
View
Any view
Parameter
interface-type interface-number:
redirecting configuration information is to be displayed.
running
Port with priority marking configured
Packet direction
ACL rules for traffic classifying
Priority marking action
cos indicates that the CoS precedence of packets is marked
dscp indicates that the DSCP precedence of packets is marked
local-precedence indicates that the Local precedence of packets is marked
Specifies the type and number of a port, for which the traffic
1-10
Description