Smart Link Configuration Commands; Display Smart-Link Flush - H3C s3600 series Command Manual

1

Smart Link Configuration Commands

Smart Link Configuration Commands

display smart-link flush

Syntax
display smart-link flush
View
Any view
Parameters
None
Description
Use the display smart-link flush command to view the information about how the Smart Link device
processes flush messages.
Examples
# Display the information about how the Smart Link device processes flush messages.
<Sysname> display smart-link flush
Flush interface :Ethernet1/0/1
Count of flush packets received
Time of last flush packet received
Source MAC of last flush packet received
Device ID of last flush packet received
Control VLAN ID of last flush packet received : 1
Table 1-1 Description on the fields of the display smart-link flush command
Flush interface
Count of flush packets received
Time of last flush packet received
Source MAC of last flush packet received
Device ID of last flush packet received
Field
: 1
: 22:52:23 2006/04/01
: 000f-e20f-5566
: 000f-e20f-5566
Interface that receives the latest legal flush
message
Total number of flush messages received
Time when the last legal flush message is
received
Source MAC address in the last legal flush
message received
Bridge MAC address of the device from which
the last legal flush message was received
1-1
Description