Hitachi Compute Blade 2000 User Manual page 37

Precautions for Safe Use
NOTICE
Controller properties submenu 2
This setting item is not supported. Do not use this setting.
Refer to [Chapter 5: MegaRAID WebBIOS].
Schedule Consistency Check setting submenu
This setting item is not supported. Do not use this setting.
Refer to [Chapter 5: MegaRAID WebBIOS].
Power operation
Follow the prescribed procedure for power operation. Powering on or off not according to the
prescribed procedure can cause equipment failure.
Refer to [Chapter 3: Turn the Power On or Off].
Connecting a cable to the management module
If a device with the same IP address as that for the BMC on the management module or server
blade exists on the network, a failure will occur on the system equipment when you connect
the management module to a network.
Complete a network configuration before connecting a cable to the management module.
Refer to [Chapter 6: Cable connection for the system Console].
xxxvii