Samsung S3C2416 User Manual page 563

16/32-bit risc
Table of Contents

Advertisement

S3C2416X RISC MICROPROCESSOR
8.1.18 VIDEO Interrupt Control Register
Register
VIDINTCON
0x4C8000AC
VIDINTCON
FIFOINTERVAL
[25:20]
SYSMAINCON
SYSSUBCON
SYSIFDONE
FRAMESEL0
[16:15]
FRAMESEL1
[14:13]
INTFRMEN
FIFOSEL
[11:5]
FIFOLEVEL
INTFIFOEN
INTEN
Frame interrupt (SUBINT_LCD3) has two interrupt sources, which are Frame interrupt0 and 1.
NOTE:
For example, if FRAMESEL0 is '00b' and FRAMESEL1 is '00b', then Frame interrupt (SUBINT_LCD3) is
asserted at the start of RGB_VSYNC. If FRAMESEL0 is '00b' and FRAMESEL1 is '01b', then Frame
interrupt (SUBINT_LCD3) is asserted twice at the start of RGB_VSYNC and BACK porch.
Address
R/W
R/W
Indicate the Video interrupt control register
Bit
These bits control the interval of the FIFO interrupt.
[19]
Sending complete interrupt enable bit to Main LCD
0 = Interrupt Disable.
1 = Interrupt Enable.
[18]
Sending complete interrupt enable bit to Sub LCD
0 = Interrupt Disable.
1 = Interrupt Enable.
[17]
i80-System Interface Interrupt Enable control (only for i80-
System Interface mode).
0 = Interrupt Disable.
1 = Interrupt Enable.
Video Frame Interrupt 0 (SUBINT_LCD3) at start of :
00 = BACK Porch
10 = ACTIVE
Video Frame Interrupt 1 (SUBINT_LCD3) at start of :
00 = None
10 = VSYNC
[12]
Video Frame interrupts (SUBINT_LCD3) Enable control bit.
0 = Video Frame Interrupt Disable
1 = Video Frame Interrupt Enable
FIFO Interrupt control bit, each bit has the meaning of
[11:7] Reserved
[ 6] Window 1 control ( 0: disable, 1: enable)
[ 5] Window 0 control ( 0: disable, 1: enable)
[4:2]
Video FIFO Interrupt (SUBINT_LCD2) Level Select
000 = 25% left
010 = 75% left
[1]
LCD FIFO interrupt (SUBINT_LCD2) Enable control bit.
0 = LCD FIFO Level Interrupt Disable
1 = LCD FIFO Level Interrupt Enable
[0]
LCD interrupt (INT_LCD) Enable control bit.
0 = LCD Interrupt Disable
1 = LCD Interrupt Enable
Description
Description
01 = VSYNC
11 = FRONT Porch
01 = BACK Porch
11 = FRONT Porch
001 = 50% left
011 = empty
LCD CONTROLLER
Reset Value
0x3F00000
Initial state
100 = full
0x3F
0
0
0
0
0
0
0
0
0
0
21-43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents