USB2.0 DEVICE
8.18 DMA TRANSFER COUNTER REGISTER (DTCR)
The byte write count register keeps the byte (half word) count value of a TX packet from MCU. The counter value
will be used to determine the end of TX packet.
Register
Address
DTCR
0x4980_0044
MTCR
Bit
[31:11]
DTCR
[10:0]
16-26
R/W
R/W
DMA Transfer Counter Register
R/W
Reserved
R/W
To operate single mode transfer, DTCR is needed to be set
11'h0002. In case of Burst mode, the MCU should set max
packet value.
S3C2416X RISC MICROPROCESSOR
Description
Description
Reset Value
0x0
Initial State
11'h0