Samsung S3C2416 User Manual page 314

REAL TIME CLOCK
1.5.4 Tick Time Count Register 2 (TICNT2)
Register
TICNT2 0x57000048
TICNT2
TICK TIME COUNT 2
1.5.5 RTC ALARM Control (RTCALM) Register
The RTCALM register determines the alarm enable and the alarm time. Note that the RTCALM register generates
the alarm signal through both ALMINT and ALMWKUP as power mode.
For using ALMINT and ALMWKUP, ALMEN must be enable.
If compare value is year, ALMEN and YEAREN must be enable.
If compare values are year,mon,date,hour,min and sec, ALMEN,YEAREN,MONEN,DATEEN,HOUREN,MINEN
and SECEN must be enable.
Register
RTCALM 0x57000050
RTCALM
Reserved
ALMEN
YEAREN
MONEN
DATEEN
HOUREN
MINEN
SECEN
13-10
Address R/W
R/W
Bit
[16:0] High 17 bits of 32bit tick time count value
Address R/W
R/W
Bit
[7]
[6] Alarm global enable
0 = Disable,
Note: For using ALMINT and ALMWKUP, set ALMEN=1'b1
[5] Year alarm enable
0 = Disable,
[4] Month alarm enable
0 = Disable,
[3] Date alarm enable
0 = Disable,
[2] Hour alarm enable
0 = Disable,
[1] Minute alarm enable
0 = Disable,
[0] Second alarm enable
0 = Disable,
Description
Tick time count register 2
Description
Description
RTC alarm control register
Description
1 = Enable
1 = Enable
1 = Enable
1 = Enable
1 = Enable
1 = Enable
1 = Enable
S3C2416X RISC MICROPROCESSOR
Reset Value
Initial State
Reset Value
Initial State
0x00
b'000000
0x0
0
0
0
0
0
0
0
0