Displaying And Maintaining A Cluster - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Stack&Cluster
Quidway S3100 Series Ethernet Switches

2.5 Displaying and Maintaining a Cluster

You can view the configuration of a cluster using the display commands, which can be
executed in any view.
Table 2-12 Display and maintain cluster configurations
Operation
Display the global
NDP configuration
(including
interval
NDP packets and
the holdtime)
Display
information about
the
discovered by NDP
and connected to
specified ports
Display the global
NTDP information
Display
information
collected
NTDP
Display state and
statistics
information about a
cluster
Display
information about
the
devices of a cluster
Display
information about
the
members
Clear
statistics on a port
the
display ndp
to send
the
neighbors display
port-list
display ntdp
device
display
through [ verbose ]
display cluster
the
display cluster candidates
[ mac-address H-H-H |
candidate
verbose ]
the
display cluster members
cluster [ member-num | verbose ]
the NDP reset
[ interface port-list ]
Huawei Technologies Proprietary
Command
ndp interface
ntdp device-list
ndp statistics
2-11
Chapter 2 Cluster
Remark
Optional
This command can
executed in any view.
Optional
This command can
executed in any view.
Optional
This command can
executed in any view.
Optional
This command can
executed in any view.
Optional
This command can
executed in any view.
Optional
This command can
executed in any view.
Optional
This command can
executed in any view.
Optional
This command can
executed in user view.
be
be
be
be
be
be
be
be