Configuring The Dns Test Parameters - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
No.
3
4

6.9.2 Configuring the DNS Test Parameters

This part describes how to set DNS test parameters.
Context
Do as follows on the NQA client (DNS client):
Procedure
Step 1 Run
system-view
The system view is displayed.
Step 2 Run:
dns resolve
Enable dynamic DNS resolution. By default, the function is disabled.
Step 3 Run:
nqa test-instance admin-name test-name
An NQA test instance is created and the test instance view is displayed.
Step 4 Run:
test-type dns
The test type is set to DNS.
Step 5 Run:
dns-server ipv4 ip-address
The IPv4 address of the DNS server is configured.
Step 6 Run:
destination-address url urlstring
The name of the destination host is configured.
For detailed parameter configurations, see the chapter
Step 7 Run:
start
The NQA test is started.
Select the start mode as required because the start command has several forms.
Issue 01 (2011-10-26)
Data
Host name to be resolved
Start mode and end mode of the test
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuring Universal NQA Test Parameters
6 NQA Configuration
273