Optional) Setting The Aging Time Of The Router Interface; Optional) Setting Parameters Related To The Aging Time Of Member Interfaces - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Multicast
No.
9
10

4.7.2 (Optional) Setting the Aging Time of the Router Interface

Context
To set the aging time of the router interface, do as follows on the S2700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mld-snooping router-aging-time router-aging-time
The aging time of the router interface is set.
By default, if the router interface receives an MLD Query message, the S2700 sets the remaining
aging time of the interface to 180 seconds.
----End
4.7.3 (Optional) Setting Parameters Related to the Aging Time of
Member Interfaces
Context
To set the parameters related to the aging time of member interfaces, perform the following steps
at a random order.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 MLD Snooping Configuration
Procedure
(Optional) Duration for suppressing the same
MLD messages
(Optional) Number of MLD snooping entries
that can be configured or learned
63