Adjusting Control Parameters Of A Multicast Source; Huawei Proprietary And Confidential; Establishing The Configuration Task - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Procedure
l
l
----End
Example
Run the display pim interface verbose command, and you can view the detailed information
about PIM on the interface in the public network instance.
<Quidway> display pim interface verbose
VPN-Instance: public net
Interface: Vlanif117, -

6.4 Adjusting Control Parameters of a Multicast Source

A multicast device can control the forwarding of multicast data based on multicast sources. This
helps to control multicast data flows and limit information that can be obtained by downstream
receivers to enhance security.

6.4.1 Establishing the Configuration Task

After basic functions of PIM-DM are configured, you can configure the lifetime of a multicast
source and source address-based filtering rules as required.
Issue 01 (2011-10-26)
Run the command display pim interface [ interface-type interface-number | up | down ]
[ verbose ] to check PIM on interfaces of the public network.
Run the command display pim neighbor [ neighbor-address | interface interface-type
interface-number | verbose ]
PIM version: 2
PIM mode: Dense
PIM state: down
PIM DR: -
PIM DR Priority (configured): 1
PIM neighbor count: -
PIM hello interval: 30 s
PIM LAN delay (negotiated): -
PIM LAN delay (configured): 500 ms
PIM hello override interval (negotiated): -
PIM hello override interval (configured): 2500 ms
PIM Silent: disabled
PIM neighbor tracking (negotiated): -
PIM neighbor tracking (configured): disabled
PIM generation ID: -
PIM require-GenID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 180 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM state-refresh processing: enabled
PIM state-refresh interval: 60 s
PIM graft retry interval: 3 s
PIM state-refresh capability on link: capable
PIM BFD: disabled
PIM dr-switch-delay timer : not configured
Number of routers on link not using DR priority: -
Number of routers on link not using LAN delay: -
Number of routers on link not using neighbor tracking: -
ACL of PIM neighbor policy: -
ACL of PIM ASM join policy: -
ACL of PIM SSM join policy: -

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.
*
to check PIM neighbors of the public network.
6 PIM-DM (IPv4) Configuration
104