Optional) Configuring The Reserved Vlan Of The Stack; Optional) Enabling The Stacking Function - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
No.
2
3

3.5.2 (Optional) Configuring the Reserved VLAN of the Stack

This section describes how to configure the reserved VLAN for the stack.
Context
When the default reserved VLAN of the stack is used for other services, you need to configure
a new reserved VLAN before enabling the stacking function.
The reserved VLAN of the stack is configured on the master switch.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
stack reserved-vlan vlan-id
The reserved VLAN is configured.
By default, a stack system uses VLAN 4093 as the reserved VLAN.
----End

3.5.3 (Optional) Enabling the Stacking Function

Context
Before connecting stack devices through leased stack cables, do as follows on the stacking-
capable devices.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
stack enable
The stacking function is enabled on the S3700.
Issue 01 (2011-07-15)
Data
Stack priority of an S3700
MAC address switchover time
NOTE
The reserved VLAN cannot be used for other services.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Stacking
34