Clear Ip Dhcp Snooping Binding; Clear Ip Dhcp Snooping Statistics; Show Ip Verify Source - NETGEAR ProSafe M7100-24X User Manual

1/0/20

clear ip dhcp snooping binding

Use this command to clear all DHCP Snooping bindings on all interfaces or on a specific
interface.
Format
clear ip dhcp snooping binding [interface <unit/slot/port>]
Mode
• Privileged EXEC
• User EXEC

clear ip dhcp snooping statistics

Use this command to clear all DHCP Snooping statistics.
Format
clear ip dhcp snooping statistics
Mode
• Privileged EXEC
• User EXEC

show ip verify source

Use this command to display the IPSG configurations on all ports.
Format
show ip verify source
Mode
• Privileged EXEC
• User EXEC
Term Definition
Interface
Interface address in unit/slot/port format.
Filter Type
Is one of two values:
• ip-mac: User has configured MAC address filtering on this interface.
• ip: Only IP address filtering on this interface.
IP Address
IP address of the interface
MAC Address
If MAC address filtering is not configured on the interface, the MAC Address field is
empty. If port security is disabled on the interface, then the MAC Address field displays
"permit-all."
VLAN
The VLAN for the binding rule.
Example: The following shows example CLI display output for the command.
(switch) #show ip verify source
Interface Filter Type
--------- -----------
ProSafe Managed Switch
0 0
IP Address
--------------- -----------------
Switching Commands
138
0
MAC Address Vlan
-----