Security Permit-Fxo - AddPac PassFinder AP2520 User Manual

PassFinder AP2520 VoIP Router/Gateway Operation Manual
security password okok1234
5.7.5.19.

security permit-FXO

The outgoing call from remote side to FXO of this system to PSTN or PABX route
is security concerned. To protect a call from un-secure user in remote side,
when security permit-FXO is disabled, the call from remote side that is not
registered in session target list of VoIP dial-peer will be dropped.
When session target is set to "ras" with gatekeeper, this command should be
set to permit all call to the FXO (This command is only useful without
gatekeeper). If no form of this command is used, security is enabled and do
not permit a call from unregistered VoIP peer.
security permit-FXO
no security permit-FXO
5.7.5.19.1. Syntax
This command has no arguments or keywords.
5.7.5.19.2. Default Value
Permit All Calls
5.7.5.19.3. Command Mode
Voice Service Configuration Mode
5.7.5.19.4. Usage Guideline
To keep the security of the calls coming to the FXO port through the network,
the AP2520 Gateway provides two methods – "Security permit-FXO" command
and the voice class user. Since it is possible to directly attempt calls to the
PSTN through this FXO port or indirectly attempt calls to the PSTN through the
PBX internal line, unauthorized remote users can attempt calls as well.
AddPac Technology Co., Ltd.
Version 1.10 / Mar. 2002
308
-
To
-