VoiceFinder AP2120 VoIP Gateway User's Guide Version 1.00
4.12.2.
Command in the Global Configuration Mode
[Command Formats and Optional Commands]
access-list { option }
1. Set the access-list for the packet.
2. For more information, refer to Access-List in the previous chapter.
arp {option}
1. Statically or dynamically registers ARP entries.
2. Option
bridge { option }
1. Set the bridge.
2. For more information, refer to Bridge Configuration in the previous
clock [yy mm dd hh mm ss]
Set the system clock of the present Gateway.
dhcp-list { option }
1. Set DHCP.
2. Refer to DHCP Configuration in the previous chapter.
ethernet [full-duplex]
1. To set Ethernet interface as "Full-Duplex".
2. Default is "Half-Duplex".
AddPac Technology Co., Ltd.
1) request [ip-address-number]: Forcefully sends ARP requests for the
host of a certain IP and registers it in the ARP table
2) static
<ip-address-number>
registers Mac address in the ARP table for the IP host.
3) table-size <table-size-number>: Sets the size of the ARP table. The
AP2120 Gateways supports 10 ~ 256 size.
chapter.
<mac-address-number>:
Statically
144
-
-
Need help?
Do you have a question about the VoiceFinder AP2120 and is the answer not in the manual?