Enable Stpd Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

STP Commands

enable stpd ports

enable stpd <stpd_name> ports [all | <port_list>]

Enables the STP protocol on one or more ports.

Syntax Description

Usage Guidelines

If you create an STPD with a unique name, the keyword

If STP is enabled for a port, BPDUs are generated and processed on that port if STP is enabled for the

associated STPD.

You must configure one or more STPDs before you can use the

create an STPD, use the

and experience with STP, you can configure the STPD using the

the default STP parameters are adequate for most networks.

The following command enables slot 2, port 4 on an STPD named Backbone_st:

enable stpd backbone_st ports 2:4

This command was available in ExtremeWare XOS 10.1.

Platform Availability

This command is available on all platforms.

Specifies an STPD on the switch.

Specifies all ports for a given STPD.

Specifies one or more ports or slots and ports.

create stpd <stpd_name>

is optional.

enable stpd ports

command. If you have considerable knowledge

configure stpd

ExtremeWare XOS 11.5 Command Reference Guide

commands. However,

Extremeware xos 11.5