Table 104: Show Dhcp Binding Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

For e series broadband services routers - broadband access

Table of Contents

host1:vr1#show dhcp binding relay proxy no-interface

To display binding information for DHCP clients that match the specified remote ID

host1:vr1#show dhcp binding remote-id "remote id.*even"

Filtering the display of DHCP client bindings by the circuit ID string or remote ID

string is not supported for the DHCP external server application. DHCP external

server does not store information about the agent-circuit-id suboption or

agent-remote-id suboption of option 82.

Table 104 on page 545 lists the show dhcp binding command output fields.

Table 104: show dhcp binding Output Fields

Agent Circuit Id

Chapter 22: Monitoring and Troubleshooting DHCP

Field Description

Client binding ID

MAC address of client

Binding type; external (DHCP external server), local (DHCP local

server), or relay-p (DHCP relay proxy)

For DHCP local server bindings, the subnet of the IP address

assigned to the client; 0.0.0.0 for DHCP external server and DHCP

relay proxy bindings

IP address assigned to client

State of the DHCP client binding

IP address of the DHCP server that allocated the client IP address

For DHCP relay proxy the IP address of the DHCP relay proxy;

for DHCP local server bindings, the IP address of the DHCP relay

that sent the packet or 0.0.0.0 if the packet comes from the client;

for DHCP external server bindings, the giaddr from the DHCP

Total time for which the IP address is available, in seconds

Time remaining on the current lease, in seconds

IP interface that is associated with the client

DHCP Option 61 received from the client

Subinterface for DHCP local server bindings; does not apply to

DHCP external server and DHCP relay proxy

Indicates Relay Agent Information option (option 82)

Suboption 1 of the DHCP Relay Agent information option

Monitoring DHCP Binding Information