Show Rsvp Session; Table 474: Show Rsvp Session Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Related
Documentation
List of Sample Output
Output Fields

Table 474: show rsvp session Output Fields

Field Name Field Description
Information about ingress RSVP sessions.
Ingress RSVP
Information about ingress RSVP sessions. Each session has one line of output.
Ingress RSVP
Information about egress RSVP sessions.
Egress RSVP
Information about the transit RSVP sessions.
Transit RSVP
Destination (egress switch) of the session.
To
From Source (ingress switch) of the session.
State State of the path:
being taken down gracefully.
Address Destination (egress switch) of the LSP.
LSPstate State of the LSP that is being handled by this RSVP session. It can be either
Dn (down), or
gracefully.
Rt Number of active routes (prefixes) that have been installed in the routing table.
For ingress RSVP sessions, the routing table is the primary IPv4 table (
For transit and egress RSVP sessions, the routing table is the primary MPLS table
mpls.0
Number of active routes (prefixes) that have been installed in the forwarding
ActiveRoute
table. For ingress RSVP sessions, the forwarding table is the primary IPv4 table
(
inet.0
MPLS table (
Name of the LSP.
LSPname
Copyright © 2010, Juniper Networks, Inc.
Example: Configuring MPLS on EX Series Switches on page 3365
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3396
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos95/index.html
show rsvp session on page 3512
show rsvp session statistics on page 3513
show rsvp session detail on page 3513
show rsvp session extensive on page 3513
Table 474 on page 3511 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Up , Down , or AdminDn
AdminDn . AdminDn indicates that the LSP is being taken down
).
). For transit and egress RSVP sessions, the forwarding table is the primary
).
mpls.0
Chapter 126: Operational Mode Commands for MPLS
. AdminDn indicates that the LSP is
command.

show rsvp session

Level of Output
detail
All levels
All levels
All levels
All levels
All levels
All levels
detail
Up , brief, detail
brief
).
inet.0
detail
brief, detail
3511