Monitoring Status And Configuration For Mpls Tunnels - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring Status and Configuration for MPLS Tunnels

Purpose
Action
368
Table 86: show mpls rsvp hello instance Output Fields (continued)
Field Name
GR
Up
Neighbor
Local Address
Restart Time
Recovery Time
SrcInstance
DstInstance
Hellos Sent
Hellos Received
Hellos Suppressed
Hellos Acks Sent
Hellos Acks Received
show mpls rsvp hello instance
Display status and configuration for all tunnels or for a specific tunnel in the current router
context.
To display the status and configuration for all tunnels:
Field Description
Graceful restart in progress. The hello sequence number from the
peer changed. The router is in graceful restart helper mode and
actively sending hellos to the peer.
Hellos were received from the peer. The router is actively sending
hellos to the peer.
IP address of remote hello adjacency peer
IP address of the local hello adjacency peer
Graceful restart time, in milliseconds
Graceful restart recovery time, in milliseconds
Nonzero 32-bit value that represents the sender's hello instance.
The value is maintained on a per-neighbor basis. This instance value
changes only when the sending peer resets, when the sender's router
reboots, or when communication is lost between the hello adjacency
peers.
32-bit SrcInstance value most recently received from hello
adjacency peer; value is zero when no instance has been received
from that peer
Number of hello messages sent
Number of hello messages received
Number of hello messages suppressed; message generation is
suppressed when a hello request object is received from the
destination node within the hello interval
Number of acknowledgments sent in response to hello requests
received
Number of acknowledgments received in response to hello requests
sent
Copyright © 2010, Juniper Networks, Inc.