Monitoring L2Tp And L2Tp Dial-Out; Monitoring The Mapping For User Domains And Virtual Routers With Aaa - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

CHAPTER 16

Monitoring L2TP and L2TP Dial-Out

Monitoring the Mapping for User Domains and Virtual Routers with AAA

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
When you have configured L2TP and L2TP dial-out on your E Series router, you can
monitor the active tunnels and sessions.
NOTE: All of the commands in this chapter apply to both the LAC and the LNS.
L2TP and L2TP dial-out topics are described in the following sections:
Monitoring the Mapping for User Domains and Virtual Routers with AAA on page 417
Monitoring Configured Tunnel Groups with AAA on page 419
Monitoring Configuration of Tunnel Parameters with AAA on page 422
Monitoring Global Configuration Status on E Series Routers on page 423
Monitoring Detailed Configuration Information for Specified Destinations on page 425
Monitoring Locked Out Destinations on page 427
Monitoring Configured Destination Profiles or Host Profiles on page 427
Monitoring Configured and Operational Status of all Destinations on page 429
Monitoring Statistics on the Cause of a Session Disconnection on page 430
Monitoring Detailed Configuration Information about Specified Sessions on page 431
Monitoring Configured and Operational Summary Status on page 432
Monitoring Configured Switch Profiles on Router on page 433
Monitoring Detailed Configuration Information about Specified Tunnels on page 434
Monitoring Configured and Operational Status of All Tunnels on page 436
Monitoring Chassis-wide Configuration for L2TP Dial-out on page 437
Monitoring Status of Dial-out Sessions on page 442
Monitoring Dial-out Targets within the Current VR Context on page 443
Monitoring Operational Status within the Current VR Context on page 444
Display the mapping between user domains and virtual routers.
To display the mapping between user domains and virtual routers:
417