[26-53] Service-Description; [26-55] Dhcp-Options; [26-56] Dhcp-Mac-Address - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide

[26-53] Service-Description

Use the following command to manage the Service-Description RADIUS attribute.
radius include profile-service-description

[26-55] DHCP-Options

Use the following command to manage the DHCP-Options RADIUS attribute.
radius include dhcp-options

[26-56] DHCP-MAC-Address

Use the following command to manage the DHCP-MAC-Address RADIUS attribute.
radius include dhcp-mac-address
228
CLI Commands Used to Modify RADIUS Attributes
radius include profile-service-description
Use to include the Service-Description attribute in Access-Request, Acct-Start,
and Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include profile-service-description acct-stop enable
Use the no version to restore the default, disable.
radius include dhcp-options
Use to include the DHCP-Options attribute in Access-Request, Acct-Start, and
Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include dhcp-options acct-stop enable
Use the no version to restore the default, disable.
radius include dhcp-mac-address
Use to include the DHCP-MAC-Address attribute in Access-Request, Acct-Start,
and Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.