11
C
ONFIGURING THE
DHCP D
EVICE
In the Microsoft Windows Server family, DHCP server log files use audit logging to
permit log files to remain enabled without additional monitoring or administration.
This allows you to manage log file growth or conserve disk resources.
This chapter provides information on configuring your Microsoft DHCP device
using the Adaptive Log Exporter. For information on adding or managing a device,
see
Chapter 4 Managing
Configure the Root Log Directory parameter, which is the location of the DHCP
server log files. By default, the DHCP audit log files are located at
%WINDIR%\system32\dhcp\DhcpSrvLog-xxx.log.
Once you configure your Microsoft DHCP device, make sure you restart the DHCP
service to allow the Adaptive Log Exporter to communicate with your DHCP
device.
STRM Adaptive Log Exporter
M
Devices.
ICROSOFT