[65] Tunnel-Medium-Type; [66] Tunnel-Client-Endpoint - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

For e series broadband services routers - broadband access
Table of Contents

Advertisement

radius include tunnel-type

[65] Tunnel-Medium-Type

Use the following command to manage the Tunnel-Type-Medium RADIUS attribute.
radius include tunnel-medium-type

[66] Tunnel-Client-Endpoint

Use the following command to manage the Tunnel-Client-Endpoint RADIUS attribute.
radius include tunnel-client-endpoint
radius include tunnel-type
Use to include the Tunnel-Type attribute in Access-Request, Acct-Start, and
Acct-Stop messages.
You can control inclusion of the Tunnel-Type attribute by enabling or disabling
this command.
See radius include
Example
host1(config)#radius include tunnel-type access-request enable
Use the no version to restore the default, enable.
radius include tunnel-medium-type
Use to include the Tunnel-Medium-Type attribute in Access-Request, Acct-Start,
and Acct-Stop messages.
You can control inclusion of the Tunnel-Medium-Type attribute by enabling or
disabling this command.
See radius include
Example
host1(config)#radius include tunnel-medium-type acct-start enable
Use the no version to restore the default, enable.
radius include tunnel-client-endpoint
Use to include the Tunnel-Client-Endpoint attribute in Access-Request, Acct-Start,
and Acct-Stop messages.
You can control inclusion of the Tunnel-Client-Endpoint attribute by enabling or
disabling this command.
See radius include
Chapter 3: Configuring RADIUS Attributes
CLI Commands Used to Modify RADIUS Attributes
211

Advertisement

Table of Contents
loading

Table of Contents