Omron CS1W-MCH71 MOTION CONTROL UNIT - 09-2004 Manual page 490

Interface Specifics
Effect on Other Functions
System Parameter
Program Example
Axis Machine
Lock Condition
Classification
Status Bits Busy
In Servo Lock
No Origin
Axis Operating
Positioning Completed
Positioning Completed (No.2)
Axis Machine Lock Status
Command Disabled/Enabled
Axis Not Used/Used
In Manual/Automatic Mode
In Axis machine lock state, the origin search operations (with DATUM com-
mand, Axis Control Bit: Origin Search) will be executed in the same way as
the operations with the Axis Control Bit [Forced Origin].
Nil
x+32 to 63.05 x+32 to 63.13
Axis Operating Command
Disabled/Enabled
Item
No effect
No effect
No effect
Axis machine lock state will not
be changed when ON.
No effect
No effect
No effect
Axis machine lock state is can-
celled when OFF.
No effect
No effect
x+0 to 31.13
Axis Machine Lock
Section 7-4
Effect
467