Omron CS1W-MCH71 MOTION CONTROL UNIT - 09-2004 Manual page 358

Command Details
Note
Description
BIN to BCD (BCD)
Command type
Format
Operand
Operand Setting range
First term Variable
Second term Word type: 0-
9999 (See
note.)
Long type: 0-
99999999
Note
Description
Block Transfer (XFER)
Command type
Format
Operand
Operand Setting range
Transfer source first Variable
data
Setting range when viewed as BCD data.
• BIN command converts the specified value (BCD data) into binary (BIN
code).
• BIN command can be used only for integer data.
1 2 3
1234 (BCD)
The BCD command converts the BIN data into the BCD data.
Not executed as an independent command (no type).
<Variable>= BCD<numerical value>;
Ex: #MW1000 = BCD #MW1001;
Decimal
Bit
No No
No No
Setting range when viewed as BIN data.
• BCD command converts the specified value (BIN data) to BCD code.
• BCD command can be used only for integer data.
0 4 D
1234 (binary)
Data is transferred as a block.
Multiple execution command
XFER<transfer source first data>_<transfer destination first data>_N<number
of transferred data>;
Ex: XFER #MW1000_#MW1100_N2;
Decimal
Bit
No No
4 0
Variable specification
Word Long
word number
Yes Yes No
Yes Yes No
2 1
Variable specification
Word Long
word number
Yes No No
Section 6-3
4 D 2
1234 (binary)
INC/ ABL
influ-
Real Indirect
ence
specifi-
cation
No No
Yes No
2 3 4
1234 BCD
INC/ ABL
influ-
Real Indirect
ence
specifi-
cation
No No
335