Download
Share
Print this page
Omron CJ Series Manual
  1. Manuals
  2. Brands
  3. Omron Manuals
  4. Controller
  5. CJ Series
  6. Manual

Omron CJ Series Manual

Host link driver
Hide thumbs Also See for CJ Series:

Advertisement

Quick Links

CS/CJ Series
HOST Link Driver
1
System Configuration....................................................................................................... 3
2
Selection of External Device ............................................................................................ 5
3
Example of Communication Setting ................................................................................. 6
4
Setup Items .................................................................................................................... 24
5
Cable Diagram ............................................................................................................... 29
6
Supported Device........................................................................................................... 35
7
Device Code and Address Code.................................................................................... 37
8
Error Messages.............................................................................................................. 38
1
OMRON Corporation

Advertisement

loading
Need help?

Need help?

Do you have a question about the CJ Series and is the answer not in the manual?

Questions and answers

Related Manuals for Omron CJ Series

Summary of Contents for Omron CJ Series

  • Page 1: Table Of Contents

    OMRON Corporation CS/CJ Series HOST Link Driver System Configuration....................... 3 Selection of External Device .................... 5 Example of Communication Setting ................. 6 Setup Items ........................24 Cable Diagram ....................... 29 Supported Device......................35 Device Code and Address Code..................37 Error Messages......................38...
  • Page 2 CS/CJ Series HOST Link Driver Introduction This manual describes how to connect the Display (GP3000 series) and the External Device (target PLC). In this manual, the connection procedure will be described by following the below sections: System Configuration "1 System Configuration" (page 3)

  • Page 3: System Configuration

    CS/CJ Series HOST Link Driver System Configuration The system configuration in the case when the External Device of OMRON Corporation and the Display are connected is shown. Communication Series Connection Port SIO Type Cable Diagram Settings Cable Diagram 1 CS1G-CPU45...
  • Page 4 CS/CJ Series HOST Link Driver Connection Configuration • 1:1 Connection External Display Device • 1:n Connection Max 16 units (for RS422/485 connection) External External Display Device Device • Access beyond network You can access beyond maximum 3 levels of network.

  • Page 5: Selection Of External Device

    Select the maker of the External Device to be connected. Select "OMRON Corporation". Select a model (series) of the External Device to be connected and connection method. Select "CS/CJ Series HOST Link". Check the External Device which can be connected in "CS/CJ Series HOST Link" in Driver system configuration.

  • Page 6: Example Of Communication Setting

    CS/CJ Series HOST Link Driver Example of Communication Setting Examples of communication settings of the Display and the External Device, recommended by Pro-face, are shown. Setting Example 1 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings] from [System setting window] in workspace.
  • Page 7 CS/CJ Series HOST Link Driver Device Setting To display the setting screen, click ([Setting]) of External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. When you connect multiple External Device, click from [Device-Specific Settings] of [Device/PLC Settings] to add another External Device.
  • Page 8 CS/CJ Series HOST Link Driver Setting of External Device Click the [HOST Link Port] tab from the [PC System Settings] of the ladder software for the communication settings of the HOST link port (RS232C port on CPU) and set as below.
  • Page 9 CS/CJ Series HOST Link Driver Setting Example 2 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 10 CS/CJ Series HOST Link Driver Device Setting To display the setting screen, click ([Setting]) of External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. When you connect multiple External Device, click from [Device-Specific Settings] of [Device/PLC Settings] to add another External Device.
  • Page 11 CS/CJ Series HOST Link Driver Setting of External Device Click the [Peripheral Port] tab from the [PC System Settings] of the ladder software for the communication settings of the peripheral port and set as below. Setup Items Settings Speed 19200...
  • Page 12 CS/CJ Series HOST Link Driver Setting Example 3 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 13 CS/CJ Series HOST Link Driver Device Setting To display the setting screen, click ([Setting]) of External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. When you connect multiple External Device, click from [Device-Specific Settings] of [Device/PLC Settings] to add another External Device.
  • Page 14 CS/CJ Series HOST Link Driver Setting of External Device For communication settings of INNER board, open [I/O Table] of the ladder software first. Then, select [INNER Board Soft Switch] from the menu displayed by right-clicking [CS**-CPU**] (CPU of the External Device to set) and set as below.
  • Page 15 CS/CJ Series HOST Link Driver Setting Example 4 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 16 CS/CJ Series HOST Link Driver Device Setting To display the setting screen, click ([Setting]) of External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. When you connect multiple External Device, click from [Device-Specific Settings] of [Device/PLC Settings] to add another External Device.
  • Page 17 CS/CJ Series HOST Link Driver Setting of External Device For communication settings of INNER board, open [I/O Table] of the ladder software first. Then, select [INNER Board Soft Switch] from the menu displayed by right-clicking [CS**-CPU**] (CPU of the External Device to set) and set as below.
  • Page 18 CS/CJ Series HOST Link Driver Setting Example 5 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 19 CS/CJ Series HOST Link Driver Device Setting To display the setting screen, click ([Setting]) of External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. When you connect multiple External Device, click from [Device-Specific Settings] of [Device/PLC Settings] to add another External Device.
  • Page 20 CS/CJ Series HOST Link Driver Setting of External Device For communication settings of the communication unit, you need to register the serial communication unit to be used by the ladder software in advance. After registration, open [I/O Table] of the ladder software. Click [Switch] from the menu displayed by right- clicking [Serial Communication Unit] and set as below.
  • Page 21 CS/CJ Series HOST Link Driver Setting Example 6 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 22 CS/CJ Series HOST Link Driver Device Setting To display the setting screen, click ([Setting]) of External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. When you connect multiple External Device, click from [Device-Specific Settings] of [Device/PLC Settings] to add another External Device.
  • Page 23 CS/CJ Series HOST Link Driver Setting of External Device For communication settings of the communication unit, you need to register the serial communication unit to be used by the ladder software in advance. After registration, open [I/O Table] of the ladder software. Click [Switch] from the menu displayed by right- clicking [Serial Communication Unit] and set as below.

  • Page 24: Setup Items

    CS/CJ Series HOST Link Driver Setup Items Set communication settings of the Display with GP-Pro EX or in off-line mode of the Display. The setting of each parameter must be identical to that of External Device. "3 Example of Communication Setting" (page 6)
  • Page 25 CS/CJ Series HOST Link Driver Setup Items Setup Description Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving Wait To Send packets to transmitting next commands. RI/VCC You can switch RI/VCC of the 9th pin when you select RS232C for SIO type.
  • Page 26 CS/CJ Series HOST Link Driver Setup Items in Off-line Mode • Please refer to GP3000 Series User Manual for more information on how to enter off-line mode or about operation. Cf. GP3000 Series User Manual "Chapter 4 Settings" Communication Settings To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings] in off-line mode.
  • Page 27 CS/CJ Series HOST Link Driver Device Setting To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings]. Touch the External Device you want to set from the displayed list, and touch [Device]. Setup Items Setup Description Select the External Device for device setting. Device name is a title of External Device set Device/PLC Name with GP-Pro EX.(Initial value [PLC1])
  • Page 28 CS/CJ Series HOST Link Driver Option To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings]. Touch the External Device you want to set from the displayed list, and touch [Option]. Setup Items Setup Description RI/VCC You can switch RI/VCC of the 9th pin when you select RS232C for SIO type.

  • Page 29: Cable Diagram

    CS/CJ Series HOST Link Driver Cable Diagram The cable diagram shown below may be different from the cable diagram recommended by OMRON Corporation. Please be assured there is no operational problem in applying the cable diagram shown in this manual.
  • Page 30 GP (COM1) 15m or less. CS1W-CN226 (2m) or CS1W-CN626 (6m) by OMRON Corporation Your own cable A) When using CS1W-CN225 or CS1W-CN625 by OMRON Corporation or your own cable D-sub 25 pin (socket) D-sub 9 pin (socket) for peripheral port Signal...
  • Page 31 CS/CJ Series HOST Link Driver Cable Diagram 3 Display Cable Notes (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 Connector terminal block conversion adapter (COM1) by Pro-face AGP-3302 (COM2) CA3-ADPTRM-01 Your own cable Your own cable Online adapter by Pro-face...
  • Page 32 CS/CJ Series HOST Link Driver • 1:n connection External Device Terminal External Device D-sub 9 pin (socket) block D-sub 9 pin (socket) Shield Shield Termination Signal Signal Signal resistance name name name 220Ω 1/4W Display CA3-ADPCOM-01 CA3-ADPTRM-01 TERMRX Shell Shell...
  • Page 33 CS/CJ Series HOST Link Driver C) When using the online adapter (CA4-ADPONL-01), the connector terminal block conversion adapter (CA3- ADPTRM-01) by Pro-face and your own cable • 1:1 connection Terminal External Device block D-sub 9 pin (socket) Shield Termination Signal...
  • Page 34 CS/CJ Series HOST Link Driver D) When using the online adapter (CA4-ADPONL-01) by Pro-face and your own cable • 1:1 connection External Device D-sub 9 pin (plug) D-sub 9 pin (socket) Termination Shield resistance Signal Signal name name 220Ω 1/4W...

  • Page 35: Supported Device

    CPU unit. CJM1 Series does not include the extension data memory (E0 to EC, current bank EM). CJ Series does not include the extension data memory (current bank EM). You cannot write during RUN. GP-Pro EX Device/PLC Connection Manual...
  • Page 36 CS/CJ Series HOST Link Driver • Please refer to the GP-Pro EX Reference Manual for system data area. Cf. GP-Pro EX Reference Manual "Appendix 1.4 LS Area (only for direct access method)" • Please refer to the precautions on manual notation for icons in the table.

  • Page 37: Device Code And Address Code

    CS/CJ Series HOST Link Driver Device Code and Address Code Use device code and address code when you select "Device & Address" for the address type in data displays. Device Device Name Device Code (HEX) Address Code Channel I/O 0080...

  • Page 38: Error Messages

    CS/CJ Series HOST Link Driver Error Messages Error messages are displayed on the screen of Display as follows: "No. : Device Name: Error Message (Error Occurrence Area)". Each description is shown below. Item Description Error No. Name of External Device where error occurs. Name of External Device is a title of Device Name External Device set with GP-Pro EX.

This manual is also suitable for:

Cs1g-cpu45Cs1 seriesCs seriesCs1g-cpu44Cs1g-cpu43Cs1g-cpu45h ... Show all