Pluggables And Cabling Commands; Introduction - Allied Telesis IE220 Series Manual

8

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
and monitor Pluggables and Cabling, including:
•
•
•
For more information, see the
Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50644-01 Rev B
Pluggables and
Cabling Commands
Cable Fault Locator for finding faults in copper cabling
Optical Digital Diagnostic Monitoring (DDM) to help find fiber issues when
links go down
Active Fiber Monitoring for detecting changes in optical power received over
fiber cables.
Guide.
"clear fiber-monitoring
"clear test cable-diagnostics
"debug fiber-monitoring" on page 289
"fiber-monitoring action" on page 291
"fiber-monitoring baseline" on page 293
"fiber-monitoring enable" on page 295
"fiber-monitoring interval" on page 296
"fiber-monitoring sensitivity" on page 297
"show system fiber-monitoring" on page 299
"show system pluggable" on page 302
"show system pluggable
"show system pluggable
"show test cable-diagnostics
"test cable-diagnostics tdr
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Pluggables and Cabling Feature Overview and
interface" on page 287
tdr" on page 288
detail" on page 304
diagnostics" on page 307
tdr" on page 309
interface" on page 310
286