Setting up Measurement Conditions and Display
Configuring the Time Zone
Configuring the Time Zone
Functional description
The E4981A allows you to set a time
changes whenever the time zone is changed.
Set the time difference from Greenwich Mean Time, GMT.
To configure the time zone:
Step 1.
Press [System].
Step 2.
Press the SYSTEM CONFIG softkey.
Step 3.
Use the cursor keys to select the TIME ZONE field.
Step 4.
Use the following softkey:
Softkey
HOUR INCR++
MINUTE INCR+
MINUTE DECR–
HOUR DECR––
When the E4981A is returned to the factory default settings, the time zone
setting is also initialized.
70
zone."Configuring the System Date" on page 71
Description
Increases the time up to +15 in steps of 1.
When the time is plus (+), increments the time from 0 to 45 in steps of
15.
When the time is minus (–), increments the time from –45 to 0 in
steps of 15.
When the time is plus (+), decrements the time from 45 to 0 in steps of
15.
When the time is minus (–), decrements the time from 0 to –45 in
steps of 15.
Decreases the time up to –12 in steps of 1.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter